EXOS2 Parameters can be used for EQ5, Meade LXD75, Vixen gp/sp, Skyview pro, Celestron Advanced GT (CG5) and Celestron omniXLT Series.
EQ3D Parameters can be used for Celestron CG4.
Setp 1: If you find order the wrong version, please contact my mailvbox in time(service@terransindustry.com).
Setp 2: Install replacement motor brackets and accessories
Step 3: Power on the Onstep control box and use your phone or computer to connect to the wifi of the control box.
Step 4: Open 192.168.0.1 website and Open advanced Settings at the bottom of the first page.
![](https://cdn.shopify.com/s/files/1/0629/4411/6929/files/Advanced_setting_1024x1024.jpg?v=1711031152)
Step 5: Modify the parameters of the EXOS2 suite as follows. After the parameters in the red box are modified, click upload, power off, and restart the device to check whether to modification is successful.
![](https://cdn.shopify.com/s/files/1/0629/4411/6929/files/EXOS2_Parameter_1024x1024.jpg?v=1711031529)
Step 5: Modify the parameters of the EQ3D suite as follows. After the parameters in the red box are modified, click upload, power off, and restart the device to check whether to modification is successful.
![](https://cdn.shopify.com/s/files/1/0629/4411/6929/files/EQ3D_Parameter_1024x1024.jpg?v=1711031551)